Solar Power Manager (B) with Embedded 10000mAh Li-Po Battery [discontinued]
The Solar Power Manager (B) from Waveshare is compatible with general 6-24V solar panels.
It can recharge the internal 3.7V rechargeable LiPo battery through a solar panel or the USB-C connection and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP).
The module features MPPT (Maximum Power Point Tracking) function and multi-protection circuits, therefore, it is able to keep operating with high efficiency, stability and safety. It is suitable for solar-powered, low-power IoT, and other environmental protection projects.
Please read the safety information on the product wiki before using.
Lithium Battery Shipping: Due to courier restrictions, this product can only be shipped within England/Wales. With this item in your cart, your shipping options will be limited to DHL. Why?
Features
- Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
- Flexible battery recharging: from a solar panel or USB-C adapter
- Compatible with 6V~24V solar panels, DC jack or screw terminal input
- Onboard MPPT SET switch, select the level closest to the input level to improve recharging efficiency
- Onboard aluminium electrolytic capacitor and SMD ceramic capacitors
- PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery
- Several LED indicators, for monitoring the status of the solar panel and battery
- Multiple protection circuits: over charge / over discharge / reverse-proof / over heat / over current
Interface
1) Solar panel input
– Recharging through DC-002 jack or screw terminal
2) TYPE-C recharging/output port
– Supports 5V power adapter for recharging
– Supports PD protocol quick charge adapter
– Supports PD/QC/FCP/PE/SFCP multi protocols output
3) USB output port
– 5V/3A regulated output
– Supports PD/QC/FCP/PE/SFCP multi protocols output
4) Battery on/off switch
5) BOOT button
6) Quick charge indicator
7) Solar panel status indicators
– Solar Warning: lights up if solar panel is reversed
– Solar Charge: lights up when recharging from solar panel
– Solar Done: lights up when the battery is fully recharged
8) Battery life indicators
Specification
|
Voltage of solar panel (SOLAR IN) |
6V ~ 24V (Default setting: 18V) |
| Chargers | Solar panel, Power adapter, USB |
| USB charge interface | USB-C: 5V/2A Supports fast charge mode (PD/QC/FCP/PE/SFCP) Supports discharge |
| Internal Li-battery | 3.7V 10000mAh high-capacity Li-battery |
| USB input voltage | 5V (USB-C interface, supports PD fast charge) |
| 5V output | 5V / 3A (USB-OUT、TYPE-C) |
| Charge cut-off voltage protection | 4.2V ± 1％ |
| Overdischarge protection voltage | 2.9V ± 1％ |
| Solar panel charge efficiency | ~78% |
| USB charge efficiency | ~93% |
| 3.7V battery boost output efficiency | ~92% |
| Max quiescent current | <2mA |
| Operating temperature | -40℃ ~ 85℃ |
| Dimensions | 108.0 × 71.0 × 25.2mm |
Package Contents
- 1x Solar Power Manager (B)
- 1x DC Jack terminal block adapter
Resources
- Product Wiki
- Schematic
- SW6106 Datasheet
