2x1A DC Motor Shield for Arduino
This DC Motor shield for Arduino uses L293 chip which allow to drive two 7-12V DC motors with maximum 1A current each channel. This shield can be directly stacked on standard Arduino Uno and Arduino Mega.
| Micro:bit Driver Expansion Board | Gravity: Dual Bipolar Stepper Motor Shield for Arduino (DRV8825) | Quad DC Motor Driver Shield for Arduino | ||
| SKU | DRI0001 | DFR0548 | DRI0023 | DRI0039 |
| Chip | L293B | HR8833 | DRV8825 | TB6612FNG |
| Operating voltage | 5V DC | / | 3.3V/5V | 2.7~5.5V |
| Motor drive voltage | 7-12V DC | 3.5~5.5V DC | 8.2-45VDC | 2.5V-13.5V |
| Maximum drive current | 1A each way | 1.5A | 1.6A |
1.2A continuous current (per channel) 2A (continuous pulse) 3.2A (single pulse) |
| Motor drive using pins | PIN4/5/6/7 (Arduino Controllor) | / |
D4，D5，D6 D7，D8，D12 |
D3,4,5,6,7,8,11,12 |
| Dimension | 56x57mm | 63 x 58mm | 83*55*25mm | 52mm * 53mm |
| Weight (g) | 60 | 64 | 48 | 24 |
| Frequently used With |
FIT0565/FIT0520/ FIT0450/FIT0492/ N20 Series |
FIT0565/FIT0520/ FIT0450/FIT0492/ N20 Series |
FIT0278/FIT0503 |
FIT0565/FIT0520/ FIT0450/FIT0492/ N20 Series |
| Key Features | With motor indicator |
8-way servo interface DC motor x4/stepper motor x2(multiplexed with motor interface) |
Full step, 1/2, 1/4, 1/8, 1/16, 1/32 step mode | High-speed drive capability, can drive ordinary 2-phase stepper motor to 5000RPM, and drive quad DC at the same time |
| Gravity: 2x2A Motor Shield for Arduino Twin | TMC260 Stepper Motor Driver Shield | 2x2A DC Motor Shield for Arduino | ||
| SKU | DFR0502 | DRI0017 | DRI0035 | DRI0009 |
| Chip | TB6612FNG | L298 | TMC260 | L298P |
| Operating voltage | 2.7~5.5V | 5V | 5V | 5V |
| Motor drive voltage | 12V (peak value) | 4.8 ～ 35V | 40V max | 6.5~12v(VIN Power Supply),4.8~35V (External Power Source) |
| Maximum drive current |
1.2A continuous current (per channel) 2A (continuous pulse) 3.2A (single pulse) |
up to 2A/channel | up to 2A per motor coil | 2A |
| Motor drive using pins |
D4 D5 D6 D7 |
D10,11,12,13 | / | Pin 4,5,6,7 are used to drive two DC motor |
| Dimension | 68.5mm×53.3mm | 56x57mm | 55x55mm | |
| Weight (g) | 36 | 35 | 35 | 60 |
| Frequently used With |
FIT0565/FIT0520/ FIT0450/FIT0492/ N20 Series |
FIT0565/FIT0520/ FIT0450/FIT0492/ N20 Series |
FIT0278/FIT0503 |
FIT0565/FIT0520/ FIT0450/FIT0492/ N20 Series |
| Key Features | Integrated XBee Slot, XBee, WiFi Bee, Bluetooth Bee, I2C. |
Mirrored version of DRI0009. Drive pins: 10, 11, 12, 13 Not compatible with IO expansion board V7.1. The control port is four, which reduces the overhead of the Arduino digital ports, and easy to program. |
Suitable for driving bipolar stepper motors. SPI serial bus control or STEP/DIR signal control. Controllers such as Mega with full port expansion. 256 times microstep subdivision. |
Use mirror motor to drive DRI0017 to aviod the conflicts . Support PWM speed control. Support PLL advance speed control |
Specifications
- 2 way 7-12V motor drive
- Up to 1A current each way
- PIN 4,5,6,7 are used to drive two DC motors
- Support PWM speed control
Resources
- Product Wiki
Package Contents
- 1x 1A Motor Shield For Arduino
