2.8″ HDMI IPS LCD Touchscreen Display for Raspberry Pi (640×480)
This little display packs lots of convenient features making this a superb mini display for any Raspberry Pi project. In fact, thanks to the HDMI connection and USB-C touch interface, you can even use it with your Jetson Nano or Windows PC.
The display is a 2.8″ IPS panel and holds a respectable 640×480 resolution with 160° viewing angles. The backlight is also adjustable via buttons on the side, allowing you to turn it up, down or off completely.
It’s not only great to look at – it’s also good to touch! The display has 5-point (device/OS dependant) capacitive touch which can be controlled via Pogo Pins when attached to a Raspberry Pi, removing the clutter of a USB cable. All other devices can use the USB-C port for the touch interface (USB-C cable included). Touch port selection (Pogo/USB) is also possible via the onboard slide switch.
Similarly, the display is fed via a full-size HDMI port on the side of the board. Compact HDMI adapters are included for the Raspberry Pi 4 and 3, whilst all other devices can use the included HDMI cable.
Features
- 2.8″ IPS HDMI display
- Compatible with Raspberry Pi 4/3
- 5-point capacitive touch
- 640×480 resolution
- 160° viewing angles
- USB-C touch interface
- Pogo pin touch interface for Raspberry Pi
- Backlight control via onboard buttons
- Touch port selector switch
- Toughened glass
- Cables, adapters and fixings included
- Online development resources
- Dimensions: 65.7mm x 56mm
Package Contents
- 1x 2.8″ HDMI LCD (H)
- 1x HDMI Adapter (C)
- 1x HDMI Adapter (B)
- 1x HDMI cable
- 1x USB-A to USB-C cable
- 1x Screws/Standoffs pack
Raspberry Pi not included
Resources
- Product Wiki
