2.66″ e-Paper Module (360×184)
This 2.66″ e-paper module has a resolution of 360 x 184 pixels, can show four colours: red, yellow, black, and white, and it also supports two levels of greyscale, providing more detailed, colourful and textured images. It has a wide viewing angle of over 170 degrees, which makes it so that content is visible from various perspectives.
It is passively reflective, which eliminates the need for a backlight and makes it easier to read in bright environments. The module is power-efficient and can display the last content shown for a long time even when the power is turned off, and has online development resources and manuals, including driver board circuit diagrams and examples for Raspberry Pi, Jetson Nano, Arduino, and STM32.
Features
- No backlight, keeps displaying last content for a long time even when powered down
- Ultra-low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Operating Voltage | 3.3V/5V |
Interface | 3-wire SPI, 4-wire SPI |
Outline Dimensions | 85.0 x 38.5mm |
Display Size | 60.05 x 30.69mm |
Dot Pitch | 0.1668 x 0.1668mm |
Resolution | 360 x 184 pixels |
Display Colour | Red/Yellow/Black/White |
Grey Scale | 2 |
Full Refresh Time | 26s |
Refresh Power | <50mW |
Standby Current | <0.01uA (almost none) |
Viewing Angle | >170° |
Resources
- Product Wiki
Pinout
VCC | Power (3.3V / 5V input) |
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |
PWR | Power on/off control |
Package Contents
- 1x 2.66″ e-Paper Module (G)
- 1x GH1.25 9-Pin cable 20cm