0.96″ OLED Display Module (128×64)
This is a simple, affordable OLED display module to add to your projects using your favourite microcontroller.
This 0.96″ OLED has a 128×64 resolution and is driven by the popular SSD1306 using I2C for communication with your microcontroller – meaning it will work for lots of code libraries for various boards and programming languages. When showing data, the text is white.
The pins are pre-soldered and can be popped straight into a breadboard, ready to hook up with jumper wires.
We use them with the Raspberry Pi Pico all the time – in fact, we included a similar display in our Maker Advent Calendar, so you can re-use a lot of the examples from that day’s article – just change the display setup line to the right resolution, like this: display = SSD1306_I2C(128, 64, i2c).
We also stock a similar 1.3″ OLED display.
Features
- 0.96″ OLED display
- 128×64 resolution
- SSD1306 driver – lots of compatible code libraries
- I2C communication
- Breadboard-compatible
- White text
Pinout
The OLED display has four pins. Connect them as follows:
| Display | MicroController |
| VCC | 3.3V |
| GND | GND pin |
| SCL | I2C SCL pin |
| SDA | I2C SDA Pin |
Care: Not all OLED displays use the same pin order – check before following the wiring from a tutorial!
Resources
- Tony’s blog post (coming soon!)
- Using an SSD1315 OLED with the Raspberry Pi Pico – libraries and wiring are the same
- Maker Advent Calendar OLED article – change the display setup line to: display = SSD1306_I2C(128, 64, i2c)
Package Contents
- 1x 0.96″ OLED Display (pins pre-soldered)
